Technicians on call now · Schertz, Cibolo & Universal City Furnace & heating repair · Written price before work
Homeowner guide

How long does a furnace last in Texas?

Most gas furnaces last about 15 to 20 years. In Schertz, mild winters mean fewer heating hours, but attic heat, dust and idle summers bring their own wear.

Quick answer

Typical lifespans: gas furnace 15–20 years, electric furnace 20–30 years, heat pump 10–15 years (it works year-round). Yearly maintenance, clean filters and correct sizing push a system toward the high end. Attic heat, clogged filters and oversizing shorten it.

Lifespan by system type

System Typical life Why
Gas furnace 15–20 years Heat exchanger and motors wear with heating cycles
Electric furnace 20–30 years Simpler; no combustion or heat exchanger
Heat pump 10–15 years Runs for both heating and cooling, year-round
Heat strips (in air handler) Often 15+ years Elements and sequencers can be replaced individually

These are typical ranges, not guarantees. Installation quality and maintenance matter as much as the brand.

Does a mild climate make furnaces last longer?

Partly. A Schertz furnace runs far fewer hours per year than one in Minnesota, so components like the heat exchanger and burners see less use. But Texas adds its own stresses:

  • Attic heat: furnaces in attics bake at 130°F+ in summer, aging capacitors, control boards and wiring even while idle.
  • Idle summers: long idle months mean dust buildup and first-start failures.
  • Shared blower: the furnace blower runs all summer for the AC, so the blower motor wears year-round.
  • Hard freezes: rare events like Winter Storm Uri push systems to run nonstop for days.

What shortens furnace life

  1. Dirty filters: overheating stresses the heat exchanger and blower.
  2. Oversizing: short cycling means many more start-ups per day.
  3. Skipped maintenance: small problems compound.
  4. Poor installation: wrong gas pressure, bad venting, undersized ducts.
  5. Power surges: they damage control boards and ECM motors.

Signs your furnace is near the end

  • It's past 15 years and needs a major repair
  • Repairs are becoming frequent
  • Rising energy bills without colder weather
  • Uneven heat or trouble keeping up
  • Rust, soot or a yellow flame
  • A cracked heat exchanger diagnosis (with evidence)

How old is your furnace? Find the data plate inside the furnace door. The serial number usually encodes the manufacture date (the format varies by brand). Or check your home's build year. See our service areas page for how neighborhood age relates to furnace age in Schertz.

Make yours last longer

Change filters every 1–3 months, schedule a yearly tune-up, keep vents open, and consider a surge protector. When it's time, use the repair-or-replace calculator.

FAQ

Frequently asked questions

Don't see your question? Call (210) 898-9282.

Can a furnace last 30 years?

Some do, especially electric furnaces or well-maintained gas units in mild climates. But a 30-year-old gas furnace should get a careful yearly safety inspection, including the heat exchanger and a CO test.

Should I replace my furnace just because it's 20 years old?

Not automatically. If it passes a safety inspection and repairs are minor, you can keep it, but start planning for replacement.

Do heat pumps last as long as furnaces?

Usually not. Heat pumps run for both heating and cooling, so they typically last 10–15 years compared with 15–20 for a gas furnace.

Furnace down? Get your heat back today.

Licensed furnace repair in Schertz, TX, with a written price before work and 24/7 emergency service.

Call Now Free Estimate