A service call or diagnostic usually runs $80–$200, often credited toward the repair. Common repairs like flame sensors, igniters and switches cost $90–$450. Motors, gas valves and control boards run $300–$1,800. A failed heat exchanger can cost $1,500–$4,000+, often the point where replacement makes more sense.
Typical furnace repair prices
| Item | Typical cost | Notes |
|---|---|---|
| Diagnostic / service call | $80 – $200 | Often credited toward the repair |
| After-hours / emergency diagnostic | $120 – $300 | Nights, weekends, holidays |
| Flame sensor clean or replace | $90 – $250 | Lights, then shuts off |
| Hot surface igniter | $150 – $450 | No ignition |
| Pressure or limit switch | $150 – $450 | Often a drain or airflow issue instead |
| Blower capacitor | $120 – $350 | Blower hums but won't start |
| Thermostat repair / replacement | $120 – $450 | Smart models at the high end |
| Condensate drain / trap clearing | $120 – $300 | Leaks and pressure-switch codes |
| Control board | $350 – $900 | OEM boards cost more |
| Gas valve | $300 – $1,000 | Two-stage and modulating cost more |
| Inducer motor | $450 – $1,500 | Universal vs OEM |
| Blower motor | $450 – $1,800 | ECM variable-speed at the high end |
| Heat exchanger | $1,500 – $4,000+ | Often covered by parts warranty; labor isn't |
What makes a repair cost more (or less)
- Brand and model: proprietary parts on premium or communicating systems cost more than universal parts.
- Access: attic furnaces take longer than closet units, especially in summer heat or tight spaces.
- Timing: nights, weekends and holidays may add an after-hours charge.
- Warranty: a part under manufacturer warranty may be free, with labor still charged.
- Diagnosis quality: the cheapest repair is the right one. Replacing parts by guesswork costs more in the end.
How to judge a furnace repair quote
- Get it in writing before work starts, with the part named and the total price.
- Ask what failed and why. A good technician can explain the test that confirmed it.
- Compare with the ranges above. Prices well above them deserve an explanation, such as an OEM part, difficult access or after-hours work.
- Ask about warranty on parts and labor for the repair.
- Be cautious with replacement pressure. A "cracked heat exchanger" diagnosis should come with photos or CO readings.
Older furnace, big quote? Multiply the furnace's age by the repair cost. If the result is over 5,000, compare the repair with a new furnace. See repair or replace.
Save money on furnace repairs
- Do the free checks first: thermostat, breaker, switch, filter. See furnace not turning on.
- Schedule a fall tune-up. Catching a weak igniter in October costs less than an emergency call in January.
- Change filters regularly. Airflow problems cause many limit, blower and heat exchanger failures.