Plan on roughly $3,500–$6,000 for a standard 80% AFUE gas furnace and $4,500–$8,500 for a 95%+ high-efficiency model, installed. Attic installs, two-stage or modulating features, and duct or venting changes add to the total. A heat pump system that replaces both furnace and AC typically runs $7,000–$15,000 or more.
Installed price ranges
| Item | Typical cost | Notes |
|---|---|---|
| 80% AFUE gas furnace | $3,500 – $6,000 | Metal flue venting; simplest swap |
| 95%+ AFUE gas furnace | $4,500 – $8,500 | PVC venting and condensate drain required |
| Two-stage / modulating upgrade | +$800 – $2,500 | Quieter, steadier heat, better humidity balance |
| Attic installation | +$300 – $1,200 | Access, platform, drain pan and float switch |
| Electric furnace / air handler with heat strips | $2,500 – $5,500 | Common with heat pump systems |
| Heat pump system (heating + cooling) | $7,000 – $15,000+ | Replaces furnace and AC together |
What drives the price
Efficiency (AFUE)
AFUE is the share of fuel that becomes heat. An 80% furnace vents hot exhaust through a metal flue. A 95% condensing furnace extracts more heat, vents through PVC pipe and needs a condensate drain, which adds cost, especially when converting from 80%. In Schertz's short heating season, the yearly gas savings from 95% are smaller than in cold climates, so payback can take many years. Comfort features and rebates can still tip the balance.
Size (BTUs)
Bigger furnaces cost more, and oversized ones short cycle. A Manual J load calculation often shows Schertz homes need less capacity than rules of thumb suggest. See what size furnace do I need.
Location and access
Attic installations take more labor and need a drain pan, float switch and a code-compliant walkway. Closet and garage installs are typically less expensive.
Ductwork and venting
Leaky, crushed or undersized ducts should be fixed during installation, or the new furnace won't perform as rated. Changing efficiency levels changes the venting.
Brand and warranty
Premium lines cost more but may include longer warranties and quieter variable-speed blowers. Installation quality matters more than the badge. See best furnace brands for Texas.
What a fair quote should include
- Equipment make, model numbers and AFUE rating
- Load calculation or sizing explanation
- Removal and disposal of the old unit
- Venting, gas connection, condensate drain and electrical work
- Permit and inspection
- Thermostat (new or reconnected)
- Labor warranty in writing, plus manufacturer warranty registration
Lower the total: check utility rebates, manufacturer promotions and financing before you buy. Replacing in fall, before an emergency, gives you time to compare quotes. See rebates and financing.
Repair might still be the better deal
Before committing to a new furnace, run the numbers with the repair-or-replace calculator. A $300 repair on a 9-year-old furnace almost always beats a $5,000 replacement.